Technical Data; Disposal; Ec-Declaration Of Conformity - Batavia MAXXPACK BT-CBCD001 Mode D'emploi

• Clean the electric power tool regularly
with a damp cloth and somewhat soft
soap.
Do not use any cleaning or solvent materi-
als; these can attack the device's plastic
components. Make sure that no water can
get inside the electric power tool.

10. Technical data

Speed . . . . . . . . . . 0 – 500 / 1800 min
Impacts per Minute . . . . . 0– 28 800 min
Chuck . . . . . . . . . . . . . . . . 2 – 13 mm
Max. Torque . . . . . . . . . . . . . . .50 Nm
Dimensions. . . . . . . . . . 23 × 10 × 21 cm
Weight. . . . . . . . . . . . . . . . . . 1.28 kg
Sound Pressure Level L
Uncertainty K . . . . . . . . . . . . . . . 3 dB
pA
Sound Power Level L
Uncertainty K . . . . . . . . . . . . . . 3 dB
WA
Hand Arm Vibration
(No Load) . . . . . . . . . . . . . . 0.887 m/s
(In Metal) . . . . . . . . . . . . . . 1.892 m/s
(In Masonry) . . . . . . . . . . . . 10.12 m/s
Uncertainty K. . . . . . . . . . . . . . 1.5m/s

11. Disposal

Do not dispose of electric power
tools with domestic refuse.
The electric power tool is shipped in
packaging to reduce transport damage.
This packaging is a raw material and as
such can either be reused or can be fed
back into the raw material cycle. The elec-
tric power tool and its accessories are
made from various materials such as met-
als and plastics. Take defective compo-
nents to a special refuse collection point.
Ask about these at your specialist shop or
local council. The product and the user
manual may be subject to changes. Techni-
cal data may be changed without prior
notice.
Batteries
11.1
Think of the environment when disposing of
batteries. Contact your local authorities to
find out where your nearest disposal area is.
Do not dispose of batteries with domestic
refuse.
. . . .74.60 dB(A)
pA
. . . . . 85.60 dB(A)
WA
Do not dispose of by burning, risk of
explosion.

12. EC-Declaration of conformity

We, the Batavia GmbH, Weth. Wassebali-
estraat 6b, NL-7951 SN Staphorst, declare
by our own responsibility that the product
Cordless Combi Drill, Model BT-CBCD001,
Item-No 7062722 is according to the basic
requirements, which are defined in the Euro-
-1
pean Directives Electromagnetic Compati-
-1
bility 2014/30/EU (EMC), 2006/42/EC
(Machinery), 2011/65/EU (RoHS) and their
amendments. For the evaluation of con-
formity, the following harmonized standards
were consulted:
EN 55014-1:2017,
EN 55014-2:2015,
EN 60745-1:2009+A11,
EN 60745-2-1:2010,
EN 60745-2-2:2010,
AfPS GS 2014:01
2
Staphorst, 4 September 2018
2
2
2
Meino Seinen, QA Representative
Batavia GmbH, Weth. Wassebaliestraat 6b,
7951 SN Staphorst, Netherlands
The product and the user manual may be
subject to changes. Technical data may be
changed without prior notice.
English
7