Whakin WH0822 Guide D'installation Et D'utilisation page 10

Step 9 Mounting of Whale ® control panel (see Figs. 17-19)
When mounting the Whale ® control panel, find a suitable, convenient and accessible position. Ensure suitable
access for wiring loom connection and cable. Note that the cable supplied to connect the control panel to the water
heater is 3.5m long. The minimum depth behind panel for wiring must be 50mm. If using a control panel specific to
the manufacturer or the vehicle, the electrical connections must be made in accordance with Step 10.
The control panel requires a cut out 45mm high x 35mm wide. Feed the wires through the control panel mounting
frame (see Fig.17) and line up the holes with the control panel. Feed the wires through the cut out in the wall and
locate into desired position. Secure with 2 screws (No.4 x
(see Fig.19). In some instances, it may be necessary to make the wiring connections in Step 9 before securing the
control panel to the wall.
Please note: It may be possible to retrofit the Whale ® control panel into existing frames.
Fig. 17 Insert control panel
Step 10 Electrical connections 12V dc
Manufacturer installation
WARNING: Always disconnect the appliance from the power supply prior to working on electrical components.
The Water Heater and Control Panel come complete with electrical connectors fitted.
The Whale ® Water Heater and Control Panel are designed to be integrated into the caravan's wiring loom. The water
heater is provided with a JST VL series 8 way socket, and the control panel with a JST VL 6 way socket. 6 wires are
required to connect the water heater to the control panel, and 12V and 0V power supply are to be connected to the 8
way socket.
Please note: We recommend that a 5A fuse is fitted in the 12V dc supply.
Wire Number
Fig. 18 Secure control panel
Description
1 Switch common
2 Burner switch
5 Burner LED
6 Lockout LED
7 12v supply
8 0v supply
") (Fig. 18) provided, then clip on the surround frame
3 /4
Wire Colour
Brown
Blue
Orange
Violet
Red
White
10
Fig. 19 Installed control panel