Alcad 912-TP Série Manuel D'installation Et Programmation page 32

FUNC. SCREEN
Standard
B/G stereo
Output channel Selects the C/21 output channel in the table.
B/G CCIR C21 of channels B/G CCIR.
O u t p u t f r e q u e n c y Selects the output signal frequency.
471.25 MHz
Input frequency Select the QPSK signal input frequency.
1140 MHz
SymbolRate QPSK Select the symbol rate of the QPSK signal
27500 Kbaud
FEC QPSK
Auto
QPSK Spectrum Select the type of QPSK signal spectrum
Auto
Programs list
< - Selection- > programmed transponder.
Audio list
< - Selection- > programmed transponder.
Output format Select the image format at the end of the 4:3
< -
Imvert Dual
Audio level
< -
Subtitles list Used to select the language in which subtitles
< -
Read
series number: address of the module to update the firmware.
Chennel or freq. Selects output by channel or by frequency.
Channel
F COPY Copy...
COPY
F READ Read...
READ
DESCRIPTION
Selects the B/G CCIR standard.
QPSK.
Select the FEC of the QPSK signal.
QPSK.
Select the TV program list from the
Select the TV programs' audio list from the
- > or 16:9 module.
T
You could switch between the audio carriers
from A-B to B-A.TP-559/569/551/543/544/561
Selects the right audio level.
- > TP-559/569/551/543/544/561.
- +
- > appear.
T
Used to obtain the code, manufacturing date and
Transmit all the data from a transmodulator.
Read all the data of a transmodulator.
Tab. 2 - Functions
Serie 912-TP ENG - 31