Basics; Functions Of The Buttons On The Front Panel; Common Operations - Kenwood DMX110BT Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Basics

Basics
Functions of the Buttons on the Front
Panel
1
2
3
4
5
6
1 Remote Sensor
• Receives the remote control signal.
2 8MENU
• Displays the HOME screen. (P.6)
• Pressing for 1 second turns the power off.
• When the power off, turns the power on.
3 AUD
• Displays the Equalizer screen.* (P.17)
* During video file playback, you can set only the
preset equalizer curve.
* The Equalizer screen is not displayed during
picture file playback or on the list screen or
SETUP screen etc,
4 + , – (Volume)
• Adjusts volume. The volume will go up until 20
when you keep pressing [ + ].
5 MUTE/ DISP OFF (Display off)
• Mutes/restores the sound.
• Pressing for 1 second turns the screen off.
When the screen is off, touch the display to turn
on the screen.
6 Reset
• If the unit or the connected unit fails to operate
properly, the unit returns to factory settings when
this button is pressed.

Common operations

Ñ Turning on the power
1
Press the <8MENU> button.
NOTE
• If the gear is in the reverse (R) position, the power
cannot be turned on or off.
Ñ Turning off the power
1
Press and hold the <8MENU> button.
Ñ Adjusting the volume
1
Press the <+> or <–> button.
NOTE
• The volume will go up until 20 when you keep
pressing [ + ].
Ñ Mutes the sound
1
Press the <MUTE> button.
⿠To restore the sound, touch the button again, or
adjust the volume.
Ñ Turn off the screen
1
Press and hold the <MUTE> button.
⿠To turn on the screen, touch the display.
English |
5

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Dmx110

Table des Matières