Dantherm HCV 4 Manuel D'installation page 10

Assembly,
continued
Drifting snow, driv-
ing rain and conden-
sation
Optional extras
8
Step
12 Assemble the plug's protection with
the screws included.
13 Adjust the unit by following the Adjustment instructions
Air inlets and outlets T1 and T4 must be installed across the ceiling with a gradient
away from the ventilation system. The purpose is to prevent any drifting snow, driving
rain or condensation running down into and damaging the ventilation system, installa-
tion and house.
The warranty does not cover damage to the unit, building parts or insulation caused by
accumulated snow/water in the ducts.
To install optional extras from Dantherm Air Handling A/S, follow the instructions sup-
plied with the part.
Action