Maintaining Your Product - Epson WF-2750 Guide Rapide

Maintaining Your Product

If your printouts become too light, or you see dark or light bands across them, you may
need to clean the print head nozzles.
Cleaning uses ink, so you can check for clogged nozzles before you clean them so you don't
clean them unnecessarily.
Note: You cannot clean the print head if an ink cartridge is expended, and may not be able to clean
it when a cartridge is low. You must replace the cartridge first.
Running a Nozzle Check and Cleaning the Print Head
1. Load a few sheets of plain paper in the product.
2. Press u or d, select
You see this screen:
3. Press d, select
4. Select
Print Head Nozzle Check
5. Press one of the
6. Check the printed pattern to see if there are gaps in the lines.
Nozzles are clean
7. If there are no gaps, select
If there are gaps or you can't see the pattern, press d to select
and press .
OK
, and press
Setup
and press
Maintenance
and press
buttons to print the nozzle check pattern.
Start
and press
Finish
.
OK
.
OK
.
OK
Nozzles need cleaning
.
OK
Maintaining Your Product
Clean the print head
7