Vasco Agave E-Volve Manuel D'utilisation Et D'installation page 63

• Potential modifications of programmes
If the default time schedules for the P1, P2 and P3 programmes does not suit
your routines, you can change them.
1- If you just set the time and day, go to step 2.
From Auto, Comfort, Eco or Frost protection mode, press
5 seconds. When the cursor moves above the setting time symbol
press shortly.
1
2- Press or . The cursor moves above prog.
1
3- With or , select P1.
P1 will flash. Press
1
1
4- The P1 start time (which by default is 06:00) will flash.
Using or , you can change this time, by increments of
30 minutes.
Save by pressing
for 5 seconds to make changes.
2
5 sec.
1 2
.
NL
FR
for
DE
,
EN
IT
PL
OPERATION 11