Operating Parameters; Changing The Power - CASATELLI FILIPPO 8E Manuel

9.3 OPERATING PARAMETERS

Functioning of the stove is determined by the Power, Ventilation and Temperature parameters set by the user.

9.3.1 Changing the power

The power defines the quantity of heat produced by the stove and therefore also directly affects consumption.
To change the power:
a) Use the keys on the power menu
b) The power value will flash; change the value with the
c) Press the key to confirm the set data.
9.3.2 Changing the ventilation (except for the Silent series models)
To change the ventilation value:
a) Use the keys on the ventilation menu
b) The ventilation value will flash; change the value with the
• "OFF" = completely excludes the ventilation and the stove will only operate with natural convection (only
on models where this is included);
• "1" minimum,..., "5" maximum;
• "Auto" = automatic operation (the stove will set the speed according to the room temperature;
• "Hi" = ultra-fast operation (to be used only if there is a need to quickly heat an environment);
c) Press the key to confirm the data entered.
9.3.3 Changing the room temperature
By changing this value, the desired room temperature is set which is read directly by a probe located on the stove.
To modify the desired temperature value:
a) Move with the keys
b) The current value will flash; modify it with the
c) Press the key to confirm the data entered.
42
and press the
and press the
to the temperature menu
keys;
004778320 - 16/07/2020
key;
keys (1 minimum,...,5 maximum)
key;
keys:
and press the key;