VISIOMED BIOSYNEX EXACTO ThermoFlash premium Manuel D'utilisation page 26

Note 1: At 80 MHz and 800 MHz, the higher frequency range ap-
plies.
Note 2: These guidelines may not apply in all situations. Electro-
magnetic propagation is affected by absorption and reflection
from structures, objects and people.
a. The ISM (industrial, scientific and medical) bands between
0,15 MHz and 80 MHz are 6,765 MHz to 6,795 MHz; 13,553
MHz to 13,567 MHz; 26,957 MHz to 27,283 MHz; and 40,66
MHz to 40,70 MHz. The amateur radio bands between 0,15
MHz and 80 MHz are 1,8 MHz to 2,0 MHz, 3,5 MHz to 4,0 MHz,
5,3 MHz to 5,4 MHz, 7 MHz to 7,3 MHz, 10,1 MHz to 10,15 MHz,
14 MHz to 14,2 MHz, 18,07 MHz to 18,17 MHz, 21,0 MHz to 21,4
MHz, 24,89 MHz to 24,99 MHz, 28,0 MHz to 29,7 MHz and 50,0
MHz to 54,0 MHz.
b. The compliance levels in the ISM frequency bands between
150 kHz and 80 MHz and in the frequency range 80 MHz to 2,7
GHz are intended to decrease the likelihood that mobile/port-
able communications equipment could cause interference if
it is inadvertently brought into patient areas. For this reason,
an additional factor of 10/3 has been incorporated into the
formulae used in calculating the recommended separation
distance for transmitters in these frequency ranges.
c. Field strengths from fixed transmitters, such as base stations
for radio (cellular/cordless) telephones and land mobile radios,
amateur radio, AM and FM radio broadcast and TV broadcast
cannot be predicted theoretically with accuracy. To assess the
electromagnetic environment due to fixed RF transmitters, an
electromagnetic site survey should be considered. If the meas-
ured field strength in the location in which the LX-26E is used
exceeds the applicable RF compliance level above, the LX-26E
should be observed to verify normal operation. If abnormal
performance is observed, additional measures may be neces-
sary, such as re-orienting or relocating the LX-26E.
d. Over the frequency range 150 kHz to 80 MHz, field strengths
should be less than 3 V/m.
Recommended separation distances between portable and
mobile RF communications equipment and the EQUIPMENT
or SYSTEM - Recommended separation distances between
portable and mobile RF communications equipment and
the model LX-26E.
27