VISIOMED BIOSYNEX EXACTO ThermoFlash premium Manuel D'utilisation page 25

NOTE 1 At 80 MHz and 800 MHz, the higher frequency range applies.
NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is
affected by absorption and reflection from structures, objects and people.
a
Field strengths from fixed transmitters, such as base stations for radio (cellular/cordless)
telephones and land mobile radios, amateur radio, AM and FM radio broadcast and TV
broadcast cannot be predicted theoretically with accuracy. To assess the electromagnetic
environment due to fixed RF transmitters, an electromagnetic site survey should be considered.
If the measured field strength in the location in which the [EQUIPMENT or SYSTEM] is used
exceeds the applicable RF compliance level above, the [EQUIPMENT or SYSTEM] should be
observed to verify normal operation. If abnormal performance is observed, additional measures
may be necessary, such as reorienting or relocating the [EQUIPMENT or SYSTEM].
b
Over the frequency range 150 kHz to 80 MHz, field strengths should be less than 10 V/m.
26
b
frequency range.
Interference may occur in the vicinity of
equipment marked with the following
symbol: