Publicité
Les langues disponibles
Les langues disponibles
-
The appliance cables must be arranged so that they are not in contact
with the patient or with other cables.
-
Use the lowest possible output power to obtain the desired results.
-
Pay attention to the use of inflammable liquids or gases such as
disinfectants, anaesthetics, solvents, etc.; the appliance is not
designed for use in atmosphere subject to explosion hazards so
ensure that any such substances have been completely eliminated or
evaporated and dispersed before activating the appliance (ensure
there are no residual substances in the area).
-
For the above reasons, also pay attention to the presence of
endogenous gases and materials impregnated with oxygen (e.g.
cotton wadding, gauzes, etc.).
-
Periodically inspect the accessories, with particular reference to the
condition of insulation of cables and electrodes.
23(5$725 ,16758&7,216
&21752/6
The appliance is equipped with the following control devices (Fig. 2):
-
illuminated main power ON/OFF switch (1) (green);
-
red AL indicator LED (alarm) (2);
-
plate electrode socket (PLATE) (3);
-
3-position selector (4) with three function LEDs:
CUT
CUT-COAG
COAG
output power control potentiometer (5).
-
IÃÃ'ÃÃ
(yellow LED)
(orange LED)
(blue LED)
G 8USPTVSBD86GÃFIDA Ã
)LJ
8h…y‚ÃqrÃBv‚…tvÃ
Publicité
