Blocking Programs By Ratings - Toshiba 27AF53 Mode D'emploi

3. Press or to display the V-CHIP menu.
CH
PICTURE AUDIO SETUP MODE OPTION
V-CHIP
BLOCKING RESET
PIN CODE
SELECT [0-9] SET ENTER
END EXIT
4. Use the Channel Number buttons (0-9) to enter your PIN code.
If you are accessing the V-Chip menus for the first time, select a
four-digit number to be your PIN code. Press ENTER. The
BLOCKING menu appears.
CH
PICTURE AUDIO SETUP MODE OPTION
V-CHIP
ENABLE BLOCKING ON OFF
SET RATING START
BLOCKING OPTION START
NEW PIN CODE START
SELECT ADJUST
5. You may now enable blocking. See "Blocking programs by ratings"
(below), "Locking channels" (page 23), "To change your PIN code"
(below), or "Blocking unrated movies or programs" (page 23).
To change your PIN code:
1. Press MENU, then press
2. Press L or M to highlight V-CHIP.
3. Press or to display the V-CHIP menu.
4. Use the Channel Number buttons (0-9) to enter your PIN code.
Press ENTER. The BLOCKING menu appears.
5. Press L or M to highlight NEW PIN CODE and press
display the NEW PIN CODE menu.
6. Use the Channel Number buttons (0-9) to enter a new code. Press
ENTER.
7. Press EXIT to return to normal viewing.

Blocking programs by ratings

The Motion Picture Association of America (MPAA) uses a rating
system to qualify motion picture content. Television broadcasters
employ a rating system to qualify the content of television programs, as
well. The MPAA, Youth TV, and TV ratings work with the V-Chip feature
and allow you to block programs according to the rating limits you set.
or to display the OPTION menu.
or
20
Note:
If you forget your PIN code, press RECALL
four times within five seconds from the V-CHIP
menu. This allows you to proceed to the
BLOCKING menu and resets your PIN code.
to
Recall
Channel
Numbers
Menu/
Enter
Exit