ECG ZH 1321 Mode D'emploi page 7

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 30
BEARD TRIMMER
English
DANGER of electric shock
Do not use the device if the device, adapter or USB
cable shows visible signs of damage, or if you have
dropped it, it fell in water, or does not work properly.
All servicing should be done by qualified service
center! Do not remove the protective covers of the
device, there is a risk of electric shock.
Do not insert any objects into the openings of the
device.
First connect the connector of the USB cable or
adapter to the device and then the plug of the USB
cable to a PC with a USB interface (power bank) or the
plug of the adapter to the mains. The electrical outlet
must be easily accessible after connection. Make sure
that the cable can not be damaged by sharp edges or
hot surfaces. Make sure that the cable is not pinched
or crushed.
Remove the USB cable from PC / adapter from the
socket always
- after each charging.
- during thunderstorms,
- before maintenance,
- when it overheats.
Never pull on the cable when disconnecting.
To avoid any risk, do not make any changes to the
device or accessories. Repairs must be carried out by
a specialized company.
DANGER! Ni-Nh battery
The device has built-in Ni-Mh batteries. Follow the
instructions below:
Do not attempt to disassemble or replace the
batteries.
7

Publicité

Table des Matières
loading

Produits Connexes pour ECG ZH 1321

Table des Matières