HP CHPTOH-0711 Manuel De L'utilisateur page 41

Setting up a wired connection
1
Follow the TV Wizard.
At your TV:
a Point the remote control at the remote control
sensor on the display and, if necessary, press
the Device button to light the HP MediaSmart
TV indicator.
On/Off
HP MediaSmart TV
Sleep Device
b Press the Media button.
Media
When you press the Media button on the remote
control for the first time, a wizard opens to guide
you through the setup for the network on the TV
and on the PC.
To start the wizard after the first time,
press Media, select Settings and press OK,
select Network and press OK, and then
select Connect to a Wired Network and
press OK.
c Follow the onscreen instructions to select a
language, and so on.
d The TV shows a message when it is time to
install the software you need on your
computer.
28
HP MediaSmart HDTV User Guide
CBL DVD AVR AUX
Screen
n
2
Install the PC software.
Use the Installation CD to install the software on
your computer (and on each computer on your
network that has media you want to share with
the TV).
At your computer:
a Insert the MediaSmart Installation CD from the
TV box into a CD drive on the computer.
b Follow the onscreen instructions to go through
the MediaSmart installation.
Windows Media Center Extender host
patches install if you have the Microsoft
Windows Vista Home Premium or
Home Ultimate operating system.
The Windows Media Player 11 software
installs if it is not already installed on your
computer.
The HP MediaSmart Services Gateway
software and CinemaNow Media
Manager software install automatically.
The HP MediaSmart Sharing Wizard
installs.
The MediaSmart User Guide also
automatically downloads onto your
computer.
If it is needed, your computer restarts
before continuing the installation.
The HP MediaSmart Sharing Wizard
opens to guide you in sharing media.
Click to authorize Windows Media
Player 11 to share media with your
MediaSmart TV, and then select the media
folders to share.
Enter information to register your TV
with HP.
Click to set up Online Media Services.
Click Finish when the installation is
complete at your PC.
n