Prepare Electrical Wiring - Haier QDT125SSKSS Instructions D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Installation Preparation

PREPARE ELECTRICAL WIRING

WARNING
- Electrical Shock Hazard
Remove house fuse or open circuit breaker before
adapter plug with this appliance.
Electrical Requirements
connected to an individual properly grounded branch
time delay fuse.
• If the electrical supply does not meet the above
requirements, call a licensed electrician before
proceeding.
Grounding Instructions–Cable Direct
This appliance must be connected to a grounded metal,
permanent wiring system, or an equipment grounding
conductor must be run with the circuit conductors and be
connected to the equipment grounding terminal or lead on
the appliance.
Grounding Instructions–Power Cord Models
This appliance must be grounded. In the event of a
malfunction or breakdown, grounding will reduce the risk
of electric shock by providing a path of least resistance
for electric current. This appliance is equipped with a cord
having an equipment grounding conductor and a grounding
plug. The plug must be plugged into an appropriate outlet
that is installed and grounded in accordance with all local
codes and ordinances.
WARNING
- Electrical Shock Hazard
The improper connection of the equipment grounding
qualified electrician or service representative if you are
in doubt that the appliance is properly grounded. Do not
modify the plug provided with the appliance; if it will not
fit the outlet, have a proper outlet installed by a qualified
technician.
1-1/2" Dia.
Hole (Max.)
Figure E
For models equipped with power cord: Do not modify
the plug provided with the appliance; if it will not fit
the outlet, have a proper outlet installed by a qualified
technician.
Cabinet Preparation and Wire Routing
• The wiring may enter the opening from either side, rear or
the same hole as the drain hose and hot water line, if
convenient. If cabinet wall is metal, the hole edge must be
covered with a bushing.
Note:
separate hole.
Electrical Connection to Dishwasher
from the rear wall.
3"
from
Cabinet
24"
from Wall
Ground
Black
White

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Qdt125ssk0ssQdt125ssl0ss

Table des Matières