Ogawa Revive OG357 Mode D'emploi page 12

16. LED LIGHTING
LED Lighting Function Start/Stop Control Button
Every press of this button will change the colors of LED lighting in the sequence of "Red > Blue >
Green >Three color auto cycle > Close".
Note:
When the massage chair is powered on, the three colors auto cycle, and the auto
programs have preset LED colors. You can also adjust the LED color by pressing the LED button.
17. SPOT/PARTIAL
Spot or Partial Back Massage
Press this button once to activate localized spot massage; the original massage mode will
continue to run. Every press of this button will change the massage function in the sequence of
"SPOT > PARTIAL > STOP" in cycle.
Note:
Partial Massage will start at the spot chosen and will move up and down 8 cm. Spot and
partial are only effective in manual massage mode. Spot function will not work while rolling
function is activated.
18/19. UPWARD/DOWNWORD ADJUSTMENT
When the spot and partial massage function are activated, this button can be used to move the
massage rollers. Hold this button to move the massage rollers upward/downward
respectively.Release the buttons when reaching desired position.
Note:
When the auto program is engaged, it will scan the back length automatically which will
set the highest position. The position can be adjusted by pressing these two buttons after hearing
beep.
20. MANUAL MASSAGE FUNCTION
KNEADING, SWEDISH, TAPPING, SHIATSU, CLAPPING, ROLLING
Press this button to activate the kneading manual massage function for a full back massage at
medium strength. Every time this button is pressed, the manual massage function will change in
the sequence of Kneading > Swedish > Tapping > Shiatsu > Clapping > Rolling > Stop.
Note:
Kneading/Swedish/Tapping/Shiatsu/Clapping have two modes.
21. STRENGTH
The Strength Adjustment Button for Kneading Function
When the kneading function is engaged, every press of this button will change the massage
speed strength interval in the sequence of "Lv1 > Lv2 > Lv3 > Lv4 > Lv5".
10
22. SPEED
The Speed Adjustment Button for Tapping, Clapping, Swedish and
Shiatsu Function
When Tapping, Clapping, Swedish or Shiatsu function is engaged, every press on this button will
change the massage speed interval in the sequence of "Lv1 > Lv2 > Lv3 > Lv4 > Lv5" in cycle.
23. WIDTH
The Width Adjustment Button for Tapping, Clapping, Shiatsu and
Rolling Function
When Tapping, Clapping, Shiatsu or Rolling function is engaged, every press of this button will
change the massage width interval in the sequence of "Narrow > Medium > Wide" in cycle.
24. VIBRATION
Seat Vibration Function Start/Stop Control Button
Press this button once to activate rhythmic seat vibration, press this button again to stop the
vibration function.
Note:
During an auto program, pressing this button can disable/enable the vibration function.
25. FULL AIR
Press this button to activate the air massage function for the full body (Calf, Foot, Arm, Shoulder).
Press this button again to stop the function.
26. PARTIAL AIR
Press this button to activate air compression massage from shoulder to soles. Every time this
button is pressed, partial air massage function will change in the sequence of Calf & Foot > Arm >
Shoulder > Stop.
Note:
If you press the full air button, it will switch from manual air function to full air function.
27. INTENSITY
The air compression intensity adjustment button has 5 levels of intensity. When the air massage
function is engaged, every press of this button will change the air intensity in the sequence of
"Lv1 > Lv2 > Lv3 > Lv4 > Lv5" in cycle.