Resetting Default Values (Reset); Statistics; Buzzer; Adjusting Contrast - Barazza 1CFFY1 Mode D'emploi

"RINSING PLEASE CONFIRM" is displayed again.
• Press the OK icon (B9) again.
Hot water flows out of the spout into the container below
and "RINSING" is displayed.
• Wait until "RINSING COMPLETE PLEASE CONFIRM" is displa-
yed.
• Press the OK icon (B9). "DESCALE COMPLETE" is displayed,
then "FILL TANK!". Fill the tank again with clean water.
• The descale programme is now terminated and the ap-
pliance is ready to make coffee again.
NOTE: If descaling is interrupted before completion, the
process must be begun again from the beginning.
Important! FAILURE TO DESCALE THE APPLIANCE RE-
GULARLY INVALIDATES THE GUARANTEE.

Resetting default values (reset)

If you change the original values, the default values can be reset
as follows:
• Press the icon (B2) to enter the menu and then the
icons (B7) and (B8) until "RESET TO DEFAULT" is di-
splayed.
• Press the OK icon (B9) and the appliance displays " RESET TO
DEFAULT PLEASE CONFIRM".
• press the OK icon (B9) to reset the default values;

Statistics

This displays statistics relating to the machine. To display, pro-
ceed as follows:
• Press the icon (B2) to enter the menu and then the
icons (B7) and (B8) until "STATISTICS" is displayed.
• Press the OK icon (B9).
• Press the icons (B7) and (B8) to verify:
• How many coffees and cappuccinos have been made.
• How many times the machine has been descale
• The total number of litres of water delivered.
• Press the icon (B6) once to exit the function or twice to
exit the menu.

Buzzer

This activates or deactivates the buzzer emitted by the machine
each time an icon is pressed or an accessory is inserted/removed.
N.B.: The buzzer is active by default.
• Press the icon (B2) to enter the menu and then the
icons (B7) and (B8) until "BUZZER" is displayed.
• Press the OK icon (B9). " BUZZER PLEASE CONFIRM" is displa-
yed.
• Press the icon (B6) to disable or the OK icon (B9) to
enable the buzzer.
• Press the icon (B6) to exit the menu.

Adjusting contrast

To increase or reduce the contrast of the display, proceed as fol-
lows:
• Press the icon (B2) to enter the menu and then the
icons (B7) and (B8) until "CONTRAST" is displayed.
• Press the OK icon (B9).
• Press the icons (B7) and (B8) until the required di-
splay contrast is reached. The progressive bar indicates the
level of contrast selected.
• Press the OK icon (B9) to confirm.
• Press the (B6) icon (B6) once to exit the function or
twice to exit the menu.

TURNING THE APPLIANCE OFF

Each time the appliance is turned off, it performs an automatic
rinse cycle which cannot be interrupted.
Danger of burns! During rinsing, a little hot water
flows from the coffee spouts.
Avoid contact with splashes of water.
To turn the appliance off, press the ON/OFF button (A7).
The appliance performs the rinse cycle then goes off.
N.B.: If the appliance is not used for an extended pe-
riod, place the main switch on the back of the appliance in the
0 position (A23).

TECHNICAL SPECIFICATION

Voltage: 220-240 V~ 50/60 Hz max. 10A
Absorbed power: 1350W
Pressure: 15 bars
Water tank capacity: 1.8 litres
Size LxHxD: 594x 378/460x398
Weight: 23/24 kg
The appliance complies with the following EC directives:
• EC Regulation 1275/2008 for standby
Materials and accessories coming into contact with food
conform to European regulation (EC) no. 1935/2004.
13
EN