Changing Coffee Temperature; Setting Water Hardness; Programming Coffee; Programming Water - Barazza 1CFFY1 Mode D'emploi

• Press the e icons (B7) and (B8) to activate the auto-
start function until "AUTO START" is displayed.
• Press the OK icon (B9) to confirm.
"AUTO START PLEASE CONFIRM" is displayed.
Press the OK icon (B9).
The symbol appears on the display.
• Press the icon (B6) to exit the menu.
• To disable auto-start, press the
icons (B7) and (B8) until "AUTO START" is displayed.
Press the OK icon (B9). "PLEASE CONFIRM" is displayed .
Press (B6) to disable, the

Changing coffee temperature

To change coffee temperature, proceed as follows:
• Press the icon (B2) to enter the menu and then the
icons (B7) and (B8) until "TEMPERATURE" is display-
ed.
• Press the OK icon (B9).
• Press the icons (B7) and (B8) to select the required
coffee temperature from low, medium and high.
• Press the OK icon (B9) to confirm the temperature selected.
• Press the icon (B6) to exit the menu.

Setting water hardness

The operating period can be extended if required, making desca-
ling less frequent by programming the machine on the basis of
the real lime content in the water used.
Proceed as follows:
• remove the "Total Hardness Test" strip (attached to page 2)
from its packaging then dip it fully in the water for a few
seconds,
Then remove and wait about 30 seconds (until it changes
colour and forms red squares).
• turn the appliance on by pressing the ON/OFF/stand-by
button (A7).
• Press the icon (B2) to enter the menu and then the
icons (B7) and (B8) until "WATER HARDNESS" is di-
splayed.
• Press the OK icon (B9).
• Press the icons (B7) and (B8) until the number coin-
cides with the number of red squares on the test strip (for
example, if there are 3 red squares on the test strip, select
the message "WATER HARDNESS 3" .
• Press the OK icon (B9) to confirm.
The coffee maker is now programmed to provide the desca-
le warning when actually necessary.

Programming coffee

For instructions on programming coffee, see the "CHANGING THE
QUANTITY OF COFFEE IN THE CUP" section.

Programming water

For instructions, see the "CHANGING THE QUANTITY OF HOT WA-
TER" section.
icon (B2), then the
Descaling
symbol disappears.
Respect the safety warnings provided by the manufacturer and
given on the descaler pack.
turer only.
Use of other descalers invalidates the guarantee.
Failure to descale the appliance as described also invalidates the
guarantee.
When "PLEASE DESCALE !" is displayed, the machine requires
descaling.
Proceed as follows:
•
•
•
•
•
•
•
•
•
•
•
•
12
Important! Descaler contains acids.
N.B.: Use the descaler recommended by the manufac-
make sure the machine is ready;
Press the icon (B2) to enter the menu and then the
icons (B7) and (B8) until "DESCALE" is displayed.
Premere l'icona OK (B9) e la macchina visualizza il messag-
gio "DECALCIFICAZIONE CONFERMARE".
Press the OK icon (B9) and the appliance displays " DESCALE
PLEASE CONFIRM".
Press the OK icon (B9). The message "ADD DESCALER PLEA-
SE CONFIRM" is displayed.
Empty the tank of water, pour the contents of the descaler
bottle into the tank respecting the instructions given on the
descaler pack, then add water. Position a container with a
capacity of about 2 litres under the hot water spout.
Press the OK icon (B9). Descaler flows out of the hot water
spout into the container below.
The appliance displays: "DESCALING".
The descale programme automatically performs a series of
deliveries and pauses.
After about 30 minutes "DESCALE COMPLETE PLEASE CON-
FIRM" is displayed.
Press the OK icon (B9). " RINSING FILL TANK" is displayed.
Empty the water tank, rinse to eliminate descaler residues,
then fill with clean water.
Replace the tank full of clean water.
EN