XBOX 360 Wireless Headset Mode D'emploi page 9

NOTES
• to use the headset, you must be
signed in with a gamer profile. The
first time you use the headset, you
must connect to Xbox Live. for
information about Xbox Live, visit
www.xbox.com/live.
• You can connect up to four wireless
headsets to a console at one time.
Each connected headset is assigned
to a quadrant on the Ring of Light.
• before you can connect a wireless
headset, at least one quadrant must
be free (unlit). to disconnect a
wireless controller, press and hold
the Xbox Guide button for three
seconds, and then turn the controller
off. to disconnect a wired controller,
unplug its cable from the console.
• If you plan to connect multiple
controllers and multiple wireless
headsets, connect a wireless
headset first, alternating between
each headset and its intended
controller.
• a controller is not required for the
headset to work with the console. If
you're not using a controller, the
headset will occupy its own
quadrant on the Ring of Light. If you

have a friends list, you can open a
chat window or send a voice
message using the wireless headset
and either the Xbox 360 media
Remote or the Xbox 360 universal
media Remote.
• an Xbox 360 Headset (wired)
takes precedence over a wireless
headset. a wireless headset cannot
be associated with a controller
that is connected to a wired
headset. to use a wireless headset
instead, disconnect the wired
headset and then repeat the
wireless connection steps.
• When you turn off your console, the
headset also turns off. It will still be
connected the next time you turn on
the console.
• Your headset is connected to only
one console at a time. You can
connect to a new console at any
time, but your connection to the
previously connected console will
be lost.
• the Xbox 360 Wireless Headset
works only within 9 meters (30
feet) of the console. objects
between the controller and the
console can reduce this range.
9