XBOX 360 Wireless Headset Mode D'emploi page 13

• If nothing else works, you can
reset the headset by pressing and
holding the power button for two
seconds or more. turn off your
console and then repeat the
wireless connection steps.
earpieceemitsnosound
make sure the headset is wirelessly
connected to your console. try
adjusting the volume using the
volume controls on the headset.
OthersCan'thearYou
make sure the headset is wirelessly
connected to your console and that
your headset isn't muted (briefly
press the power button to either
mute or unmute the headset).
make sure that voice isn't muted in
the Xbox Guide (go to Personal
Settings, Voice). Check your game
manual to determine whether you
need to push a button while speaking.

ChatDoesn'tWork
make sure the headset is wirelessly
connected to your console and that
your headset isn't muted (briefly
press the power button to either
mute or unmute the headset).
make sure your console's family
Settings for Xbox Live allow
communication with other gamers.
BatteryDoesn'tCharge
If the headset charging cable is
connected to the headset and the
battery fails to charge, the headset's
first two lights will flash in sequence
(1, 1 and 2; 1, 1 and 2; and so on) to
signal an error condition.
If this occurs, the headset may be
too hot or too cold. Leave the
headset connected to the power
adapter long enough for its
temperature to settle, at which point
the battery should charge normally.
If the error condition persists and the
headset appears to be at room
temperature, call Xbox Customer
Support (see "If You need
more Help").
1