ChargeYourHeadset - XBOX 360 Wireless Headset Mode D'emploi

before you can use your Xbox 360
Wireless Headset with your Xbox
360 console, you need to:
Charge its battery.
1
Introduce the headset to the
2
console by wirelessly connecting
the two.
Put it on.
3

ChARgeYOURheADseT

Charge your Xbox 360 Wireless
Headset before first use and
whenever its built-in battery is
depleted. to charge or recharge the
headset, connect one end of the
headset charging cable to a uSb port
on your Xbox 360 console and the
other end to the headset's power
input. turn on your console while
charging your headset.
While the headset is charging, the
four lights on the headset will flash
green in sequence (1, 2, 3, 4, off).
When charging is complete, all four
lights will blink in unison to signify
that the headset is ready for use.

NOTES
• fully charging the battery can
take up to six hours using the
headset charging cable.
• If your headset is wirelessly
connected to a console,
connecting it to the headset
charging cable will disconnect it
from the console.
• the headset is not functional
when it is connected to the
headset charging cable.
• If the headset is unused for a long
time, its battery may lose its
charge. If this occurs, simply
recharge the headset normally.
• the headset may become warm
while charging.