Before First Use; Putting Into Operation; Maintenance And Cleaning - Venta Luftwäscher LW15 Mode D'emploi

OPERATOR PANEL
1 2

BEFORE FIRST USE

Remove trial package from Styrofoam packaging.
Illustration 1: Remove upper housing (illustration LW 45). Remove transport protection from the
upper housing. Remove disk stack. Remove transport protection from the lower housing.

PUTTING INTO OPERATION

• Place the Airwasher on a dry and level surface at least 50 cm from the walls, furniture and any
other objects.
• Check whether switching power supply or cable are free from damage.
Illustration 2: Remove upper housing. Fill water into the lower housing. The appliance may
never be filled with the upper part in place! Filling level: See marker in the lower housing
(approx. 5 cm below the trough rim). Add entire content of the Venta hygiene agent (sample bottle
50 ml). Insert disk stack again.
Illustration 3: Replace the upper housing. Plug the appliance into the mains. Switch on the
appliance with button 1 and operation display 2 lights up. Select required fan stage to 1 - 2 (LW
15), 1 - 2 - 3 (LW 25/45) with selector button 5 .

MAINTENANCE AND CLEANING

UNPLUG SWITCHING POWER SUPPLY IN CASE OF ALL CLEANING AND MAINTENANCE
WORK!
DAILY
Switch off appliance with button 1 and unplug switching power supply. Remove upper housing and
top up with fresh water into the lower housing. Mount top cover again. Switch on the appliance
with button 1 .
3 4 5
1 ON / OFF button
2 Operation indication ON / OFF
Continuous lighting: ON
No lighting: OFF
Flashing: Fault
(see Eliminating faults)
3 Fan stage display 1 - 2 (LW 15),
1 - 2 - 3 (LW 25/45)
4 Automatic shut-off display
(see "Automatic shut-off")
5 Fan stage selector button
1 - 2 (LW 15), 1 - 2 - 3 (LW 25/45)
15