Operator Panel; Before First Use; Putting Into Operation; Maintenance And Cleaning - Venta Luftwäscher LW 24 Plus Mode D'emploi

Operator panel

Before first use

Illustration 1
Remove upper housing. Remove transport protection from the upper housing. Remove disk stack.
Remove transport protection from the lower housing. Remove trial package (LW 24 Plus/44 Plus:
from lower housing).

Putting into operation

• Place the air washer on a dry and level surface at least 50 cm from the walls, furniture and any
other objects.
• Check whether switching power supply or cable are free from damage.
• The Airwasher LW 24 Plus/44 Plus is not intended for use with a humidity regulator or a timer.
Illustration 2
Remove upper housing. Fill water into the lower housing. The appliance may never be filled with
the upper part in place! Filling level: See marker in the lower housing (approx. 5 cm below the
trough rim). Add entire content of the Venta hygiene agent (sample bottle 50 ml). Insert disk stack
again.
Illustration 3
Replace the upper housing. Plug the appliance into the mains. Switch on the appliance with button
and operation display

Maintenance and cleaning

Daily
1. Switch off appliance with button
top up with fresh water into the lower housing. Mount top cover again. Switch on the appliance with
button .
lights up. Select required fan stage to 1/2/3 with selector button
Unplug switching power supply in case
of all cleaning and maintenance work!
and unplug switching power supply. Remove upper housing and
ON / OFF button
Operation indication ON / OFF
Continuous lighting: ON
No lighting: OFF
Flashing: Fault (see Eliminating faults)
Fan stage display 1/2/3
Automatic shut-off display
(see "Automatic shut-off")
Fan stage selector button 1/2/3
11
.