Product Overview; Intended Use - for_q FQ-AHS 4055 BASIC Mode D'emploi

Product overview

1 Handlebar
2 Safety switch
3 Protection shield
4
Cutting bar
5
Impact guard
6 Insertion slot for battery
7 Release button for rotating
the rear handle
8 Switch interlock
9 Switch
10 Rear handle, swiveling
1
Inserting/replacing battery
Press the charged battery into
the insertion slot 6 until it clicks
into place.
EN
104

Intended Use

This garden tool is
– intended for cutting and trimming
hedges and bushes which have
a maximum branch thickness of
22 mm;
– designed for maintaining hedges
and bushes in the private sector,
– not suitable for work above shoul-
der height,
– to use according to the descriptions
and safety instructions indicated in
this operating manual.
Any other use is not as intended.
Improper use is not covered by the
warranty and the manufacturer will
reject any liability. The user is liable
for all injuries to third parties and
damage to their property.
Operate the unit only in the technical
condition as stipulated and delivered
by the manufacturer.
Arbitrary changes to the unit will
exclude the manufacturer from any
liability for resulting injury and/or
damage.
2
To remove, press the release
button (1.) and pull out the bat-
tery (2.).