for_q FQ-AHS 4055 BASIC Mode D'emploi page 100

c) When battery pack is not in use,
keep it away from other metal ob-
jects, like paper clips, coins, keys,
nails, screws or other small metal
objects, that can make a connec-
tion from one terminal to another.
Shorting the battery terminals to-
gether may cause burns or a fire.
d) Under abusive conditions, liquid
may be ejected from the battery;
avoid contact. If contact acciden-
tally occurs, flush with water. If
liquid contacts eyes, additionally
seek medical help. Liquid ejected
from the battery may cause irrita-
tion or burns.
e) Do not use a battery pack or tool
that is damaged or modified.
Damaged or modified batteries
may exhibit unpredictable behav-
iour resulting in fire, explosion or
risk of injury.
f) Do not expose a battery pack or
tool to fire or excessive tempera-
ture. Exposure to fire or tempera-
ture above 130 °C may cause ex-
plosion.
g) Follow all charging instructions
and do not charge the battery
pack or tool outside the tempera-
ture range specified in the instruc-
tions. Charging improperly or at
temperatures outside the specified
range may damage the battery
and increase ther isk of fire.
6 SERVICE
a) Have your power tool serviced
by a qualified repair person using
only identical replacement parts.
This will ensure that the safety of
the power tool is maintained.
b) Never service damaged battery
packs. Service of battery packs
should only be performed by the
manufacturer or authorized ser-
vice providers.
EN
100
7 SAFETY INSTRUCTIONS FOR
HEDGE TRIMMERS
a) Keep all parts of the body away
from the cutter blade. Do not re-
move cut material or hold mate-
rial to be cut when blades are
moving. Make sure the switch is
off when clearing jammed mate-
rial. A moment of inattention while
operating the hedge trimmer may
result in serious personal injury.
b) Carry the hedge trimmer by the
handle with the cutter blade
stopped. When transporting or
storing the hedge trimmer always
fit the cutting device cover. Proper
handling of the hedge trimmer will
reduce possible personal injury
from the cutter blades.
c) Hold the power tool by insulated
gripping surfaces only, because
the cutter blade may contact hid-
den wiring. Cutter blades con-
tacting a "live" wire may make
exposed metal parts of the power
tool "live" and could give the op-
erator an electric shock.
8 ADDITIONAL SAFETY INSTRUC-
TIONS
a) This unit is not designed to be
used by persons (including chil-
dren) who have limited physical,
sensory or mental abilities or who
have inadequate experience and/
or knowledge of the unit, unless
they are supervised by a person
responsible for their safety or
they have been instructed by the
person how to use the unit. Chil-
dren should be supervised to en-
sure that they do not play with the
unit.
b) Switch the unit off and remove
the battery under the following
conditions:
– if the unit is left unattended;
– before checking, cleaning or per-
forming other work on the unit;