Battery Replacement - Axis Communications P12 Série Guide D'installation

Battery Replacement

This Axis product uses a 3.0 V BR2032 or CR2032 lithium battery as the power supply for its
internal real-time clock (RTC). Under normal conditions this battery will last for a minimum of 5
years. Low battery power affects the operation of the RTC, causing it to reset at every power-up. A
log message will appear when the battery needs replacing. The battery should not be replaced
unless required!
If the battery does need replacing, please contact www.axis.com/techsup for assistance.
• Dispose of used batteries according to the manufacturer's instructions.
• Risk of explosion if battery is incorrectly replaced.
• Replace only with the same or equivalent battery, as recommended by the manufacturer.