Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Model HR003G with DX12
Sound pressure level (L
Sound power level (L
) : 104 dB (A)
WA
Uncertainty (K) : 3 dB(A)
Model HR004G with DX14
Sound pressure level (L
Sound power level (L
) : 104 dB (A)
WA
Uncertainty (K) : 3 dB(A)
NOTE: The declared noise emission value(s) has been
measured in accordance with a standard test method
and may be used for comparing one tool with another.
NOTE: The declared noise emission value(s) may
also be used in a preliminary assessment of exposure.
WARNING:
Wear ear protection.
WARNING:
The noise emission during actual
use of the power tool can differ from the declared
value(s) depending on the ways in which the tool is
used especially what kind of workpiece is processed.
WARNING:
Be sure to identify safety measures
to protect the operator that are based on an estima-
tion of exposure in the actual conditions of use (tak-
ing account of all parts of the operating cycle such
as the times when the tool is switched off and when
it is running idle in addition to the trigger time).
Vibration
The following table shows the vibration total value (tri-axial
vector sum) determined according to applicable standard.
Model HR001G
Work mode
Vibration
emission
2
Hammer
7.0 m/s
drilling into
concrete
(a
)
h, HD
2
Hammer
7.0 m/s
drilling into
concrete with
DX12 (a
)
h, HD
2
Chiselling func-
6.5 m/s
tion with side
grip (a
)
h, Cheq
2
Drilling into
2.5 m/s
or
metal (a
)
less
h, D
Model HR002G
Work mode
Vibration
emission
2
Hammer
6.5 m/s
drilling into
concrete
(a
)
h, HD
2
Hammer
6.0 m/s
drilling into
concrete with
DX14 (a
)
h, HD
2
Chiselling func-
7.5 m/s
tion with side
grip (a
)
h, Cheq
2
Drilling into
2.5 m/s
metal (a
)
h, D
) : 93 dB(A)
pA
) : 93 dB(A)
pA
Uncertainty (K) Applicable
standard
2
1.5 m/s
EN60745-2-6
2
1.5 m/s
EN60745-2-6
2
1.5 m/s
EN60745-2-6
2
1.5 m/s
EN60745-2-1
Uncertainty (K) Applicable
standard
2
1.5 m/s
EN60745-2-6
2
1.5 m/s
EN60745-2-6
2
1.5 m/s
EN60745-2-6
2
1.5 m/s
EN60745-2-1
Model HR003G
Work mode
Vibration
emission
Hammer
7.0 m/s
drilling into
concrete
(a
)
h, HD
Hammer
7.0 m/s
drilling into
concrete with
DX12 (a
)
h, HD
Chiselling func-
7.0 m/s
tion with side
grip (a
)
h, Cheq
Drilling into
2.5 m/s
metal (a
)
less
h, D
Model HR004G
Work mode
Vibration
emission
Hammer
6.5 m/s
drilling into
concrete
(a
)
h, HD
Hammer
6.0 m/s
drilling into
concrete with
DX14 (a
)
h, HD
Chiselling func-
7.5 m/s
tion with side
grip (a
)
h, Cheq
Drilling into
2.5 m/s
metal (a
)
h, D
NOTE: The declared vibration total value(s) has been
measured in accordance with a standard test method
and may be used for comparing one tool with another.
NOTE: The declared vibration total value(s) may also
be used in a preliminary assessment of exposure.
WARNING:
actual use of the power tool can differ from the
declared value(s) depending on the ways in which
the tool is used especially what kind of workpiece
is processed.
WARNING:
sures to protect the operator that are based on an
estimation of exposure in the actual conditions of
use (taking account of all parts of the operating
cycle such as the times when the tool is switched
off and when it is running idle in addition to the
trigger time).
EC Declaration of Conformity
For European countries only
The EC declaration of conformity is included as Annex A
to this instruction manual.
12 ENGLISH
Uncertainty (K) Applicable
2
2
1.5 m/s
2
2
1.5 m/s
2
2
1.5 m/s
2
2
or
1.5 m/s
Uncertainty (K) Applicable
2
2
1.5 m/s
2
2
1.5 m/s
2
2
1.5 m/s
2
2
1.5 m/s
The vibration emission during
Be sure to identify safety mea-
standard
EN60745-2-6
EN60745-2-6
EN60745-2-6
EN60745-2-1
standard
EN60745-2-6
EN60745-2-6
EN60745-2-6
EN60745-2-1
Publicité
Table des Matières
