Product Specifications - Welch Allyn Braun ThermoScan PRO 4000 Mode D'emploi

Masquer les pouces

Table Des Matières

Table des Matières

Les langues disponibles

• When you release the start-button, the thermo-

meter's display will show the actual anti-theft time

setting. E.g. «H08» meaning 8 hours have been

selected as the time for which the thermometer

can be used before it has to be returned to the

station.

• To change the anti-theft interval setting, press the

start button again and as often as necessary until

the desired time is shown in the display.

«H--» means the anti-theft function is off, «H01»

means 1 hour setting, etc.

• Release the start button and place the thermo-

meter back into the station within 30 seconds.

A beep will sound, confirming the setting.

• If the setting is not confirmed, repeat the proce-

dure as described.

If the anti-theft function is enabled, and when not

in the measuring process (stand-by mode) the

thermometer will show the time remaining before

the anti-theft function shuts down its operation.

«H3.5» means the anti-theft function will shut down in

3.5 hours.

If the thermometer shows «RET» (without the battery

symbol) on its display, the anti-theft time has elapsed

and the thermometer must be returned to the station

for unlocking.

If the anti-theft function is not enabled, the display

will show «OFF» when in stand-by mode.