Télécharger Imprimer la page

Neato Robotics botvac D7 connected Guide D'utilisateur page 4

Masquer les pouces Voir aussi pour botvac D7 connected:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 5
Pairing Issues - Try Again
During pairing the WI-FI LED will change based on connection status:
WI-FI LED
LED COLOR
WHAT IT MEANS
Robot is in Pairing Mode
Soft Glowing Blue
Pairing to Neato app/account
Fast Blinking Blue*
Error Connecting
Fast Blinking Red
Pairing Successful
Solid Blue
No Light
Robot Offline – please connect to access additional features
*If you've already paired, Fast Blinking Blue means the robot has lost connection. The robot could be
out of range, your Wi-Fi network may be down, or another Wi-Fi issue maybe have occurred. If out of
range, the robot will automatically reconnect when it comes back within range. Otherwise, check your
router to make sure it's operating normally.
If you don't connect within the first 60 minutes of charging your
robot OR if the robot does not connect the first time, please do the
following:
• Press and hold the Start Button
and Right Bumper for
15 seconds to turn robot off.
• Press the Start Button again to turn robot on. The WI-FI LED
is slow blinking blue and robot is in pairing mode.
• Follow steps in the Neato app to CONNECT YOUR ROBOT.
Right
Start
Side
Button
Bumper
Start Using Your Robot
Use the Neato app to start using your robot,
or press the Start Button on the robot.
START BUTTON,
HOUSE CLEAN and
ACTION
Press Start Button 1x for
house cleaning
Start
Cleaning
Press Start Button 2x for
spot cleaning
Press Start Button during
Pause/
cleaning to pause robot.
Resume
Press Start Button again
Cleaning
to resume cleaning
Cancel
Press & hold Start Button
Cleaning
for 5 seconds to cancel
(When
cleaning
Paused)
* NOTE: if LED light is blinking red or solid red, your robot needs robot maintenance or
your robot has a navigation issue. Please check the troubleshooting section of this guide.
Build Your MyFloorPlan for Advanced Mapping & Cleaning.
See page 9 of the User Guide.
Need Assistance?
Watch How–To Video here
www.NeatoRobotics.com/connect
SPOT CLEAN LEDs
HOUSE CLEAN LED
SPOT CLEAN LED
Solid Blue
Solid Blue
Pulses while paused
Pulses while paused in
in House Clean
Spot Clean
Solid Blue
Solid Blue
Robot & LEDs turn
Robot & LEDs turn off
off & robot plays a
& robot plays a tone
tone
Call 1-877-296-3286 or go to
www.NeatoRobotics.com/support
for a contact phone number in your area
Email CustomerCare@NeatoRobotics.com

Publicité

loading

Produits Connexes pour Neato Robotics botvac D7 connected