DeFelsko PosiTector IRT Mode D'emploi page 12

Bluetooth Smart
(Advanced models only, s/n 784000 and greater)
Sync Batches
Select batches to flag them for synchronization to the
PosiTector App. New batches created while Bluetooth Smart is
enabled are automatically selected.
With Bluetooth Smart enabled, select Sync Batches to transfer
selected
switching between smart devices, as only datasets and batches
that have yet to be synchronized with any smart device are
synchronized automatically.
NOTE:
If Bluetooth Smart is disabled, data from batches
selected in the Sync Batches menu are held in a queue until
communication with the PosiTector App is re-established.
Send Batches
Transfers selected
when switching between devices).
The Send Batches option is visible in the menu when the Gage
is connected to a smart device running the PosiTector App.
Determine if a software update is available for your Gage.
Updates
See www.defelsko.com/update
WARNING:
update. All stored measurements will be erased from memory.
batches to the PosiTector App. This is useful when
batches to the PosiTector App (useful
The Gage will perform a Hard Reset (pg. 5) after an
10