DeFelsko PosiTector IRT Mode D'emploi page 11

Masquer les pouces Voir aussi pour PosiTector IRT:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

WiFi
Allows connection to your local wireless network or mobile hot
spot. Ideal for using your network's internet connection for
synchronizing stored measurements with PosiSoft.net (pg. 8).
See www.defelsko.com/wifi
When USB Drive is checked
USB
mass storage device class which provides users with a simple
interface to retrieve stored data in a manner similar to USB flash
drives, digital cameras and digital audio players. USB Drive is also
required to import stored measurements into PosiSoft Desktop
software (pg. 8).
NOTE:
When connected, power is supplied through the USB
cable. The batteries are not used and the body will not
automatically power down. If rechargeable (NiMH) batteries are
installed, the instrument will trickle charge the batteries.
Bluetooth
Allows individual readings to be sent to a computer, printer or
compatible device as they are taken using Bluetooth wireless
technology. See www.defelsko.com/bluetooth
The above WiFi, USB and Bluetooth menus contain a Sync .net
Sync .net Now
Now option. When selected, the Gage immediately synchronizes
stored measurement data via its respective communication
method (internet connection required). Alternatively, select Auto
Sync .net from within the USB connect menu to automatically
synchroniz e upon connection to a PC. Additional measurements
added to memory while connected are synchronized only when the
USB cable is disconnected and reconnected, or when the Sync
.net Now option is selected. WiFi connected gages automatically
attempt synchronization upon power-up.
NOTE:
PosiSoft Desktop is required when using a USB
connection to synchronize measurements with PosiSoft.net.
Connect Menu
Connect Menu
(Advanced models only)
, the PosiTector gage uses a USB
(Advanced models only)
9

Publicité

Table des Matières
loading

Table des Matières