Memory Management - DeFelsko PosiTector SPG Mode D'emploi

Battery Type
Selects the type of batteries used in the Gage from a choice of
"Alkaline",
rechargeable).
If "NiMH" is selected, the Gage will trickle charge the batteries
while connected via USB to a PC or optional AC power supply
(USBAC). The battery state indicator symbol is calibrated for the
selected battery type. No damage will occur if the battery type
used in the Gage does not match the selected battery type.
– Average
– Maximum Value
X
HiLo Alarm
Allows Gage to visibly and audibly alert the user when readings
exceed user-specified limits.
The PosiTector SPG has internal memory storage for recording
measurement data. Stored measurements can be reviewed
on-screen or accessed via computers, tablets and smart phones.
All stored measurements are date and time-stamped.
symbol appears when the Gage is set to store measurement data.
Standard models
batches. "New Batch" closes any currently opened batch and
Advanced models
creates a new batch name using the lowest available number.
New batch names are date-stamped when they are created.
Scroll through display
modes (Advanced only)
Delete last reading
Access the Menu
"Lithium" or
Statistics Mode
X

Memory Management

store up to 250 readings in one batch.
store 100,000 readings in up to 1,000
"NiMH" (nickel-metal
– Standard Deviation
– Minimum Value
5
hydride
The
Create a new batch
(Advanced only)
Restore brightness
after dimming