Carrera CRR MATCH-15 Mode D'emploi page 39

1. Disconnect the device from the mains.
2. Switch on the device and let it run until the batteries are
empty.
NOte: even after discharging, the batteries have some
residual charge left in them. repeated switching on and
having the motor in running state will empty the batteries
completely.
3. remove the cutting attachment from the device.
(→ 7. Cleaning and care)
4. Loosen the 4 screws at the bottom of the device with a
Philips screwdriver.
5. take the bottom off.
6. take the interior out of the device and turn it around.
7. the battery pack is glued to the device. remove it.
take the batteries and the device separately to suitable
disposal.
NOte: the following will void the guarantee: Incorrect or
improper handling of the device, failure to comply with the
safety precautions that apply to the device, use of force,
alterations or repairs carried out by a party other than the
service address that we have authorised.
furthermore, components that are subject to normal wear
and tear or use are excluded from the guarantee.
39