DNT MusicFly Pro Mode D'emploi page 20

Getting started
Getting started
When you use MusicFly Pro with portable audio device
(MP3 player, CD player, portable DVD player, or mobile
phone etc.) MusicFly Pro lets you listen to your portable
audio device (MP3 player, CD player, portable DVD player,
or mobile phone etc.) through any FM radio.
Automatically power is on once you put MusicFly Pro in the
car cigarette lighter power adapter.
You can also power on & off by pressing the power button
for about 2 seconds. If no audio signal is detected for 1
hour, power is automatically off.
Turn on the radio and fi nd a frequency that is not being
used for broadcasting. Match the frequency of MusicFly Pro
on your radio using up/down button.
Select a frequency which sounds clear, makes less
background noise than other radio station.
Connect portable audio device(MP3P, CDP, PMP, PDA,
navigation or mobile phone etc.) to MusicFly Pro with
stereo cable.
Turn on the audio device and press the play button.
Set the volume to a reasonable level to get the best signal
quality. Set the volume of the audio device to medium level
and control the delicate volume using radio volume.
When you use MusicFly Pro with portable memory device
(USB storage, memory card or portable hard disk) can you
listen to sound fi les like MP3, WMA in USB storage, through
any FM radio.
Automatically power is on once you put MusicFly Pro into
the car cigarette lighter power adapter.
You can also power on & off pressing the power button for
about 2 seconds. If no audio signal is detected for 1 hour,
power is automatically off.
Turn on the radio and fi nd a frequency that is not being
used for broadcasting. Match the frequency of MusicFly Pro
on your radio using up/down button.