DNT MusicFly Pro Mode D'emploi page 18

Description & Functions
Setting the frequency
Press MENU/RPT button.
Select the frequency with
Press MENU/RPT button again.
Playback
Press
When the music is playing, press briefl y
move to the next or previous title.
Press and hold the
move to the next or previous directory.
When the playback is started, the display shows the remai-
ning time, the frequency or the equalizer depending on the
display mode.
Volume
This function is available only, if a memory device
is connected to the USB port.
Press 2 x briefl y the MENU/RPT button.
The display shows a bar (7 levels).
Set the volume with the
RDS display
This function is available only, if a memory device
is connected to the USB port.
Press 3 x briefl y the MENU/RPT button.
Select the RDS display method with with the
tons.:
NOA
- In the regular mode the display shows 8 characters.
SCA
- In scroll mode the display scrolls at intervals of 1
second.
Press MENU/RPT button again.
RDS Interval
This function is available only, if a memory device
is connected to the USB port.
Press 4 x briefl y the MENU/RPT button.
Select interval time with
button to start playback or pause.
/ buttons.
/ buttons for about 2 seconds to
/ buttons.
/ buttons for normal RDS
/ buttons, to
/ but-