Measuring Weight - Beurer GS 39 Mode D'emploi

The battery must be replaced in this case (3 x AAA 1,5V).
Place the scale on a firm, flat surface; a firm floor covering is a basic requirement for
correct weight measurement.
When supplied to the customer, the scales are set to weigh in "kg". To the rear of the scales, there
is a button „kg/lb/st" which you can use to change to 'pounds' and 'stones' when the scale is in
English.

6.2 Measuring weight

Place the scale on a firm level floor (no carpet); a firm floor covering is required for correct
measurement.
Audibly, briefly and firmly tap the scale with your foot to active the vibration sensor!
The entire display (Fig. 1) appears up to "0.0"
(Fig. 2) as a self-test (tap-on technology).
Display
8888
Now the scale is ready to measure your weight.
Display DE
0.0
Now step onto the scale. Stand still on the scale with your weight distribut-
ed evenly between both legs. The scale immediately begins to measure your
weight. After flashing twice the final measurement result appears on the dis-
play. (Fig. 3)
There is also an acoustic output. The scale switches off 10 seconds after
you step down from it. The measuring result remains visible during this time.
If the scale detects an error during weighing,
display (Fig. 4+5).
Display
DE FR GB
Beep Beep Beep
FR
Das Gerät ist L'appareil est
betriebsbereit prêt à
fonctionner
DE FR GB
Fehler Erreur Error
Fig. 1
ES RUS
Beep Звуковой сигнал
GB
The device is
ready for use
---- or appears in the
" " " "
ES RUS
Error Неисправность
16
Fig. 2
ES RUS
El aparato Прибор
está prepara- готов к
do para работе
el servicio
Fig. 3
Fig. 4
Fig. 5