Storage And Maintenance; Important; General Tips; Voice Function - Beurer GS 39 Mode D'emploi

Storage and maintenance

The accuracy of the measurements and service life of the device depend on its careful handling:

Important

• The device should be cleaned from time to time. Do not use any abrasive cleaning products and
never submerge the device in water.
• Make sure that no liquids come into contact with the scale. Never submerge the scale in water.
Never rinse it in running water.
• Do not place any objects on the scale when it is not in use.
• Do not press the button violently or with pointed objects.
• Do not expose the scale to high temperatures or strong electromagnetic fields (e.g. mobile tele-
phones).
• Protect the device from knocks, damp, dust, chemicals, marked temperature fluctuations and ne-
arby sources of heat (ovens, heaters).

General tips

• As far as possible, weigh yourself at the same time of day (ideally in the morning), after having be-
en to the toilet, on an empty stomach and without clothing, in order to obtain results which can be
compared.
• Stand up straight and still during the measurement.

5. Voice function

The device has 5 language settings:
German (DE), French (FR), English (GB), Spanish (ES) and Russian (RUS)
The device is set to German when supplied to the customer.
To change the language, switch the scale on as described in the "4.2 Measuring weight" chapter
and wait until "0.0" is shown on the display. Now press the middle button, "Language", on the back
of the scale, until the desired language is announced.

Volume control:

You can adjust the volume of the language function as you wish, or switch it off by repeatedly pres-
sing the " +/-" button on the back of the scale.
Note: Language off (no beep) means that voice output is not selected and the measurement value
will not be announced.

6. Use

This scale is used to determine the weight of human beings. The scale has a weighing range up to 150 kg.
6.1 Batteries
If present, pull the battery insulating strip off the battery compartment cover or remove the battery's
protective film and insert the battery according to the polarity. If the scale fails to operate, remove
the battery completely and insert it again. Your scale is equipped with a "replace battery" indicator.
When the scale is operated with a battery which is too weak, "Lo" appears in the display field and
the scale automatically switches off.
Display DE
Lo
FR
Batterie schwach Batterie faible
GB
Battery weak Pila débil
15
ES RUS
Слабый
заряд
батарейки