Making A Blood Pressure Measurement; Attaching The Wrist Cuff - IBP A40 Mode D'emploi

A40 Englisch 27.07.2003 15:39 Uhr Seite 12

7 making a blood pressure measurement

7.1 attaching the wrist cuff

a) Remove the wristwatch and all jewelry.
Put the blood pressure monitor on the inside of your left
wrist (fig. 1).
b) Place the cuff around your wrist, make sure that the bottom
edge of the cuff is about 5-10 mm above the palm of your
left hand (fig. 2).
Make sure that the cuff is placed on the bare skin with no
clothing in between.
12
All manuals and user guides at all-guides.com
fig. 1
fig. 2
5 - 10 mm