hestan KRP Série Manuel D'utilisation Et D'entretien page 14

GETTING TO KNOW YOUR APPLIANCE
CONTROL PANEL (ALL MODELS) CONTROL PANEL (ALL MODELS)
The electronic touch-screen control system of your Hestan refrigeration product maintains
EN
constant temperature in all compartments and displays the measured temperature on the
control panel. It also allows the user to personalize settings of the various functions and
provides alerts should a malfunction occur.
1
2
+
3
-
4
5
Many features and settings are only accessible through the control menus (Functions and
Settings). See CUSTOM FUNCTIONS AND SETTINGS on page 17 for details.
FreshSelect FreshSelect
KRP and KRB models have a FreshSelect
drawer in one of three different modes.
• Classic refrigerator mode: From 34 to 46°F [+1 to +7°C], recommended pre-set temperature
is 42°F [+6ºC].
• ExtendFresh mode preserves fresh food longer: From 28 to 36°F [-2 to +2°C], recommended
pre-set temperature is 32°F [0ºC].
• Freezer mode: From -9 to +9°F [-23 to -13°C], recommended pre-set temperature is -1°F
[-18ºC].
NOTE: KFC models have a MaxCool FreshSelect
12
©2020 Hestan Commercial Corporation
1
On/Off
Menu
Functions
42
°F
Display
Settings
1
°F
Back
Alarm
/ Freezer Compartment (KRP, KRB and KFC models only) / Freezer Compartment (KRP, KRB and KFC models only)
™ ™
Functions
42
+
°F
Settings
1
-
°F
2 3 4
Switches the appliance between ON and
Stand-by (Press for 3 seconds).
Touch this home icon to return to the main
control panel menu.
Shows the temperature of the compartment(s),
allows access to control panel menu (Functions
and Settings), and displays other messages.
Touch this arrow icon to go back to the
previous display screen.
Flashes to signal user alerts such as door
being left open in combination with a warn-
ing tone. Tap this icon to deactivate the
warning tone.
feature which allows you to operate the bottom
™
™ feature only. See page 18 for details.
(CONT.)
5