Product Description; Before First Use - Klarstein 10030713 Mode D'emploi

Electrical connection
• This wine cooler should be properly grounded for your safety. The power cord of this wine cooler is equipped
with a two-prong plug which mates with standard two prong wall outlets to minimize the possibility of elec-
trical shock. This wine cooler requires a standard 220-240 Volt A.C. /50Hz electrical outlet with two-prong
ground
• This wine cooler is not designed to be used with an inverter.
• The cord should be secured behind the wine cooler and not left exposed or dangling to prevent accidental injury.
• Never unplug the wine cooler by pulling the power cord. Always grip the plug firmly and pull straight out
from the receptacle.
• Do not use an extension cord with this appliance. If the power cord is too short, have a qualified electrician
or service technician install an outlet near the appliance. Use of an extension cord can negatively affect the
performance of the unit.
1 Control Panel
2 Handle
3 Adjustable foot
4 Hinge cover
5 Wood shelf
6 Bottom wood shelf
Before installation
Before connecting the wine cooler to the power source, let it stand upright for approximately 4 hours. This will
reduce the possibility of a malfunction in the cooling system from improper handling during transportation.
Clean the interior surface with lukewarm water using a soft cloth (see Maintenance and Cleaning).
11

Product Description

Befor first Use