Manual Operation - Duco Actuatorprint Manuel D'utilisation

ENGLISH
Removing Actuatorprint
Press once and hold the button for the Actuatorprint in order to remove
it from the network.
Replacing Actuatorprint
Press twice briefly on the button for the Actuatorprint to be removed.
After that, press once briefly on the button for the new Actuatorprint.
The latter will take on all settings/connections within the network.
5

Manual operation

Once the Actuatorprint has been paired correctly and is no longer in
'Installer mode', the button to switch between automatic mode (LED
will shine brightly) and eight hours closed (LED will go out).
32