DJO Global Compex WIRELESS Manuel De L'utilisateur page 16

EN
Then, place the modules in the spaces provided.
To do this, place the pod without the On/Off button (the green one in the illustration) in the slot indicated in green and the other pod in the
blue slot. Do the same for the other modules.
The pod without the On/Off button (the green one) has to be inserted in the small connector. A magnet should help you in positioning the
pod as well as the groove of the pod. When it is placed correctly you should hear a click.
When you place a module on the docking station, a red circle will appear to indicate that charging is in progress. The module is still
charging as long as the red circle is visible. As soon as this disappears,the module is completely charged and ready for use.
N.B.: If the module is charged when you place it on the docking no red circle will appear.
As soon as the modules and the remote control are fully charged the actual time is displayed.
User Manual
15
THIS SCREEN COMES UP AS SOON AS THE REMOTE CONTROL
IS CONNECTED TO THE DOCKING STATION.