Gree D Série Guide D'utilisation page 17

D Series Modular Air-cooled Scroll Chillers Owner's Manual
Press the Up or Down selection button to choose a needed function and press the Confirm to
go to or confirm the selection. The subsequent "ON" or "OFF", which means the function is selected
or not.
(1) Run Mode Set
Select the Run Mode and press the Confirm button, and the display on the screen is as follows:
Press the Confirm button to acknowledge a selected object, press the Up or Down selection button
to change a selected object, and press the Exit button to cancel the model set. Different models have
different display modes.If you is setting a mode in the startup state, the following prompt will appear:
Press the Confirm button for acknowledgement.
(2) Startup mode set
Select the Startup and press the Confirm button. The start/stop mode can be converted
between the manual mode and the timing mode.
(3) Auxiliary Heater Function Set
Select Auxiliary Heat and press the Confirm button, and the subsequent "ON" or "OFF",
which means the function is selected or not.
(4) Auto-Antifreeze Protection Set
Select Auto-Antifreeze, press Confirm, and the subsequent "ON" or "OFF", which means the
function is selected or not.
Copyright 2018. This translation is property of GREE PRODUCTS SL. All rights reserved. Total or partial reproduction without its express authorization is prohibited.
Timer Setup
Clock Setup
Sound
Backlight
Page 2
Page 3
Cool
Heat
Defrost
Set mode only when
unit is off!
OK
13
▲
ON【OFF】