Gree D Série Guide D'utilisation page 16

5.3.2 Menu Operation Instructions
5.3.2.1 Home page
When the controller is powered on, the microcomputer will make a 3-second automatic
detection and the LCD on the wired controller will display the following content.
The content of default home page menu is dependent on system state. XX stands for year,
month, day, hour and minute. Only one item or none is displayed in the "【】", representing the
start/stop state of the system, starting method and quantity of linked modules. Presence of the "
at the end means the system is at fault.
After entering into a menu item, if no operation is made on the Wired Controller within 10 minutes,
the system will automatically go back to the above default home page menu (Home Page).
Press the Exit button on the wired controller at any time for enough times, you can go back the
default home page menu as shown above.
5.3.2.2 Main Menu
When home page is present on the screen as shown in the above drawing, press the Confirm
to enter into the Main Menu and the following items is displayed on the screen.
Press the up or down selection button to choose required function and press the Confirm
button to go to the page.
User's Setup
◆
The following is basic settings most common for users. On the Main menu, select the User's
Setup and press the Confirm to go to the sub-menu, as shown in the following.
Copyright 2018. This translation is property of GREE PRODUCTS SL. All rights reserved. Total or partial reproduction without its express authorization is prohibited.
D Series Modular Air-cooled Scroll Chillers Owner's Manual
User's Setup
Module View
Parameter Setup
Version
Run Mode 【Cool/ Heat/Defrost】
Startup
Auxiliary Heat
Auto-Antifreeze
Page 1
12
【Manual/Timer】
ON【OFF】
"