Cleaning And Maintenance - Bestron AAF7003CO Mode D'emploi

4. Enter the tray with the frying basket into the appliance until you hear a click.
5. Put the plug (10) in the wall socket.
6. Turn the temperature dial (4) towards the desired temperature (see figure 3).
7. Turn the timer dial (1) towards the desired time. The power indicator light will illuminate and the appliance
will start to heat.
8. The timer will stop when the set time has passed. The appliance will stop heating and the temperature
pilot light will switch off. Pull the tray from the appliance by the grip and
place it on a stable, horizontal, flat surface.
9. Press the release button and take the frying basket from the tray.
10. Place the foods on a dish or plate.
11. Shut off the appliance if you do not plan on using it further. Turn the timer
dial back to 'off' (counter-clockwise) and take the plug from the socket.
WARNING:
• Do not press the release button when taking the tray from the appliance.
• Never fill the frying basket beyond the MAX indication.
• It's recommended to pre-heat the appliance for three minutes without
any foods if the appliance is still cold.
• It is recommended to occasionally take out the frying basket and shake
the food around a bit to make sure it's being properly browned on all
sides.The timer will not stop running if you do this but the heating element
will pause until the tray has been entered into the appliance again.
• Do not touch the tray and frying basket, they can become very hot. Take
precautions against burns. Use a coaster or something similar when
taking out the tray.
• The heating element and the temperature pilot light will switch on and off
during use to maintain a constant temperature.
• Do not touch the tray and frying basket, they can become very hot. Take
precautions against burns. Use a coaster or something similar when
taking out the tray.

CLEANING AND MAINTENANCE

Clean the appliance and its loose parts thoroughly after each use.
1. Turn the timer dial back to 'off' (counter-clockwise) and take the plug from the socket.
2. Let the appliance cool down.
3. Take the tray from the appliance.
4. Press the release button and take the frying basket out of the tray.
5. Remove remaining food parts by wiping them off with absorbent paper towels.
6. Clean the tray and frying basket thoroughly with hot water, dishwashing soap and a non-grating sponge.
The tray and frying basket can also be cleaned in a dishwashing machine. Dry them off thoroughly after
cleaning.
7. Clean the housing with a moist towel, if need be with some dishwashing soap added to it. Dry it off
thoroughly after cleaning.
8. Reassemble the parts.
9. Store the appliance in a dry place.
26
EN
2
3