Alpina PLUG-IN-LIGHT Mode D'emploi page 8

It is protruding from beneath the cover disc. The film ensures that the
battery is fully charged when delivered to you. This film can be removed
by simply pulling on it.
The lamp is switched on and off by pressing on the cover disc, and
it has several function levels available (Fig. 3-6). After pressing on it
the first time, the lamp is switched on and the red light is illuminated
steadily. Pressing a second time switches to blinking mode. The third
press switches on a rotating blinking light. The fourth press turns the
lamp off again.
Please note that the battery of the LED tail lamp may fail or be
discharged. For this reason, check the functionality of the lamp
regularly. Parents should take care to ensure that their child regularly
checks the functionality of the LED tail lamp as well.
The LED tail lamp is not a toy and must not be used by children except
when supervised by adults.
Symbols located on the product:
You will find six symbols on the product (Fig. 13-18).
Fig. 13: Conformity declaration: Products marked with this symbol fulfil
the specifications of the CE directive.
Fig.14: Rubbish bin: The product may not be disposed of in household
rubbish, but instead must be brought to a municipal collection point or
recycling centre.
Fig. 15: Model name: This ensures that the product is allocated
precisely.
Fig. 16: Voltage specification: 3 volts here.
Fig. 17: Battery type: CR2032 here.
Fig. 18: IP protection class: The IP protection classes establish the
extent to which it is permitted for an electric component to be exposed
to environmental factors without being damaged or constituting a safety
risk. The protection class for this lamp is IP X3, meaning that it is not
designed for damage due to solid objects. It provides protection from
spray water at an angle of up to 60°.