The Recording Function; Software Upgrade - Samsung TW-J5500 Manuel D'utilisation

THE RECORDING FUNCTION

You can record from a radio broadcast, USB device, or
an external source to a USB storage device.
1. Connect an external USB storage device to the USB 2
port on your product.
2. Tune to a station or connect an external source to
your product.
Tuner
• Select FM by pressing the SOURCE button
on the remote control or the (
product's front panel.
• Tune to a station you want to record.
External Source
• Connect an External Component/MP3 player to your
product.
• Press the SOURCE button on the remote control
or the ( ) button on the product's front panel
repeatedly to select <
< AUX 2> input.
• Play a song from the external device.
USB 1
• Connect a USB device to the USB 1 jack of your
product
• Press the SOURCE button on the remote control
or the ( ) button on the product's front panel
repeatedly to select <
• Play a song from USB 1.
3. Press the USB REC button on the remote control to
start recording.
USB 1
• Press the USB REC button on the remote control.
The currently playing file is copied onto the USB 2
device.
• Press and hold the USB REC button. All the files
in the current folder are copied onto the USB 2
device.
"COPY" is displayed. When the recording is done,
"@" will be displayed.
• If there is a duplicate file name, "FILE EXIST" is
displayed, and the function is canceled.
Tuner
• "FM RECORD" is displayed.
External Source
• "AUX RECORD" is displayed.
4. To stop recording, press the STOP (@) button on the
remote or the PLAY/PAUSE (p) button on the
product's front panel. The unit automatically creates
and saves recorded files in
MP3). After recording, a directory named
"COPY"(USB), "TUNER RECORDING" or "AUX
RECORDING" is created on your USB device.
● ● Do not disconnect the USB device or the AC Cord during
recording as this may cause damage to the file.
● ● If you disconnect the USB device during a recording,
the unfinished recording file may get damaged and
cannot be deleted. If this occurs, connect the USB
device to a PC, backup the data stored in the USB,
and then format it.
) button on the
AUX 1> input or
USB 1> input.
.MP3 format (SAM-XXXX.
17
● ● When the USB memory has insufficient free space, the
system will display "NOT ENOUGH MEMORY".
● ● The USB device or HDD you are recording to must be
formatted in the FAT file system. The NTFS file system
is not supported.
● ● The recording time may be longer with some USB
devices.
● ● The REPEAT and SOUND EFFECT function is set to
"OFF" automatically and is not available during
recording.
● ● Note that setting the input level too loud when
recording music from an external device through the
AUX or USB channel may cause noise in the recording.
If this occurs, lower the external device's volume level.
● ● The maximum TUNER/AUX recording time is 5 hours.

SOFTWARE UPGRADE

Samsung may offer upgrades for the Wireless Audio -
SoundTower system firmware in the future.
If an upgrade is offered, you can upgrade the firmware
by connecting a USB drive with the firmware upgrade
stored on it to the USB port on your product.
Note that if there are multiple upgrade files, you must
load them onto the USB drive singly and use them to
upgrade the firmware one at a time.
Please visit Samsung.com or contact the Samsung Call
Center to receive more information about downloading
upgrade files.
USB port
REC
● ● Insert a USB drive containing the firmware upgrade
into the USB port on the main unit.
● ● Do not disconnect the power or remove the USB
drive while upgrades are being applied. The main unit
will turn off automatically after completing the
firmware upgrade.
● ● When software is upgraded, settings you have made
will return to their default (factory) settings.
● ● We recommend you write down your settings so that
you can easily reset them after the upgrade.
● ● Once the software upgrade is completed, turn on the
product and then press and hold the (@) button for a
while in USB 1 mode to reset the product.
● ● If the firmware fails to upgrade, we recommend
formatting the USB device in FAT16 and trying again.
● ● Do not use a USB thumb drive formatted in the
NTSF format to upgrade the SoundTower. For
upgrading purposes, the SoundTower does not
support the NTFS format.
● ● Depending on the manufacturer, some USB devices
may not be supported.
FUNCTIONS