Internet Explorer Configuration; Tcp/Ip Configuration; Configuring Pc (Windows 2000) - Atlantis NetFly AP3 WN Guide Rapide

to the NetFly AP3 WN either directly or through an external Switch, and have
TCP/IP installed and configured to obtain an IP address through a DHCP server or a
fixed IP address that must be in the same subnet of the NetFly AP3 WN. The default
IP address of the NetFly is 192.168.1.252 and subnet mask is 255.255.255.0.
The best and easy way is to configure the PC (DHCP client) to get an IP address
from the NetFly AP3 WN (DHCP server).
Please follow the steps below for PC's network environment installation. First of all,
please check your PC's network components. The TCP/IP protocol stack and
Ethernet network adapter must be installed. If not, please refer to MS Windows
relative manuals.
 Username:admin
 Password: atlantis
 IP LAN address: (192.168.1.252), Subnet Mask (255.255.255.0)
 IP WAN adress: client DHCP
 DHCP Server: enalble (192.168.1.10-192.168.1.50)
 SSSID= A02-AP3-W300N
 Channel=6, Authentication: WPAPSK, Encrypton: AES, Encryption Key:
NetFlyAP3WN

7. INTERNET EXPLORER CONFIGURATION

Now open IE, go to Instruments menu, select the Connections tab and select
one of the following options:
 Never use remote connection
 Use remote connection if another network connection isn't available

8. TCP/IP CONFIGURATION

Configuring PC (Windows 2000)

 Go to Start / Settings / Control Panel. In the Control Panel, double-
click on Network and Dial-up Connections.

Double-click LAN Area Connection/Wireless.
 In the LAN Area Connection/Wireless Status window, click
Properties.

Select Internet Protocol (TCP/IP) and click Properties.

Select the Obtain an IP address automatically and the Obtain DNS
server address automatically radio buttons.
35