Product Overview; System Requirements - Atlantis NetFly AP3 WN Guide Rapide

Thank you for purchasing the NetFly AP3 WN that provides the easiest way to
wireless networking. Please keep this Quick Start for future reference, for more
informations please check the full manual on the CDRom.

1. Product Overview

IEEE 802.11n Wireless Multi-Function Access Point
Thanks to its embedded Access Point, based on the most recently 802.11n
specifications, is possible to create high performance WLANs with extended
coverage.
No more dead zones ( 2 x 2 dBi Antennas) and high speed (up to 10 times than
traditional IEEE802.11b/g networks) are the most impressive characteristics of this
innovative wireless technology, that ensure excellent throughtput performances
merging with total freedom of mobility.
The WDS (up to 4 AP) feature makes the device an ideal solution for quickly
creating and extending a wireless local area network (WLAN) in offices or other
workplaces.
Multiple SSIDs (up to 4 different SSID) allow users to access different networks
through a single access point.
Client Isolation and VLAN tagging
Virtual AP
The device supports up to 4 SSIDs (client isolation) with VLAN tag that allows
NetFly to perform as multiple virtual access points.
Wall Plug mount with internal AC Adapter for an easy installation.

1.1 System Requirements

NetFly AP3 WN is applicable with all TCP/IP operating systems with Ethernet port.
Drivers are not required for this adapter.
Before installing the Adapter, your PC should meet the following:
 TCP/IP protocol must be installed on each PC
 Web browser, such as Microsoft Internet Explorer 5.0 or later, Netscape
Navigator 6.0 or later
30