Components; Control Panel Components - Westinghouse WGen7500 Manuel De L'utilisateur

COMPONENTS

CONTROL PANEL COMPONENTS

1� Push-Button START/STOP: Push once to
automatically start the engine. Push again to stop
the engine.
2� Battery Switch: Turns battery ON and OFF. Must be
ON before electric or remote start.
3� Data Center: Toggle to show voltage, frequency,
total hour meter, and run/maintenance timer.
4� Main Circuit Breaker: The main circuit breaker controls
total output of all outlets to protect the generator from
overload or short circuit.
5� 120/240 Volt AC, 30 Amp NEMA 14-30R Twist-Lock
Receptacle: Receptacle can supply a maximum of
30 Amps.
COMPONENTS
6� 120 Volt AC, 20 Amp Duplex GFCI NEMA 5-20R
Receptacles: Receptacles can supply a maximum of
20 Amps.
7� 20 Amp AC Circuit Breakers: Circuit breakers
limits the current that can be delivered through the
NEMA 5-20R receptacles to 20 Amps.
8� Ground Terminal: The ground terminal is used to
externally ground the generator.
9� Smart Switch Outlet: Connects the Westinghouse
ST Switch (sold separately) to the control panel.
10� Battery Charging Port: Used to charge the battery
with the included battery charger.
11� Battery Indicator: Indicates that power is ON. Light
will remain illuminated while the unit is ON.
Westinghouse Outdoor Power Equipment, LLC | 9